The design concept for the Heavy Sword Cane was to make a cane that offered significant orthopedic support, and be stylish enough so that it didn’t look like a stodgy piece of medical equipment. The result is a very appealing cane with an extra strong partial crook handle made from Grivory, with a black, aluminum shaft that’s 2mm thick and heat-treated for strength. The shaft is handsomely tapered and capped with a thick rubber ferrule for better traction on slick, icy sidewalks or uneven terrain. The concealed sword is easily released by a hard, quick tug on the handle to break the suction of its friction lock. It’s an extremely formidable sword too, made from 3CR13 stainless steel, a little over 24” in length and 5.5mm thick. It’s sturdy enough for both cutting and thrusting, with one long cutting edge, a strong sharp point, and a fully sharpened back edge. It’s more than enough to take down any attacker, and the heavy aluminum shaft of your cane makes a fine weak hand parrying weapon and a frightfully effective bludgeon in its own right.
No Ship to CA or WI. International restrictions may also apply.
Cannot ship to California, Wisconsin, or Internationally.
Shipping $8 - $45 in the lower 48 states, excluding PO/APO. Shipping calculated at checkout.
- Description
- Specifications
- Videos (1)
- Reviews (5)
| Overall Length | 37'' |
| Blade Length | 24 1/8'' |
| Weight | 1 lb 2.4 oz |
| Edge | Sharp |
| Width | 17.8 mm |
| Thickness | 5.7 mm - 5.2 mm |
| Pommel | Pinned |
| P.O.B. | 4 1/4'' |
| Grip Length | 4 1/4'' |
| Blade | [3CR13 Stainless Steel] |
| Dimensions | Overall Length: 32'' Unshaethed |
| Class | Battle Ready |
| Manufacturer | Cold Steel |
| Country of Origin | China |
5 reviews for Cold Steel Heavy Duty Sword Cane
Only logged in customers who have purchased this product may leave a review.
Common Questions
The handle is Grivory, the shaft is black aluminum (about 2 mm thick and heat-treated), and the concealed blade is 3CR13 stainless steel.
Overall length is 37 inches; the blade is about 24 1/8 inches.
Yes. The edge is listed as sharp and the blade is described as sturdy for cutting and thrusting with a sharpened back edge.
It uses a friction lock; the blade releases with a firm, quick tug on the handle to break the suction.
It has an extra-strong partial crook handle for orthopedic support. Point of balance is about 4 1/4 inches from the guard area on the sword.
Manufactured by Cold Steel; country of origin is China.
The product listing notes no ship to CA or WI, and international restrictions may apply. Check local laws before purchase or use.
Keep the stainless blade clean and lightly oiled; inspect the friction lock gaskets and the rubber ferrule for wear; avoid exposing the rubber tip to heat.
It is a concealed sharp blade and classified as battle ready, so suitability depends on event rules and local laws; often not permitted for public costume use.
Blade thickness tapers from about 5.7 mm to 5.2 mm, width about 17.8 mm; grip length about 4 1/4 inches; pommel/handle assembly is pinned; the shaft ends with a thick rubber ferrule for traction.
Count Z. –
Excellent! The blade came sharp, but I used an Extra Fine Diamond to sharpen it even more, especially both sides of the top 8″.
Since the cane was too tall for me as orthopedic support, I used a pipe cutter to cut the aluminum tube, then a single-edge blade (the kind for scraper knives) for the rubber tube. Perfect!
If you decide to shorten the cane, do note that although I tried, I cannot remove and reinstall the original thick rubber ferrule. (Just Google 1″ / 25mm ferules)
Count Z. –
Excellent Service Update. I called and immediately service helped me to reinstall the original rubber ferrule.
I was told to use a heat gun. And to heat the aluminum (but NOT the rubber). It worked.
N.B. I also learned that the cane is not made locally, and regretfully service does not sell rubber ferrules.
Martin M. –
Cold Steel Heavy Duty Sword Cane A truly worthy self defense weapon. A few packing peanuts down the sheath (to stop any give away rattling), i used a gun barrel cleaning rod to seat them at the bottom. And to make the draw easier, i removed one of the two synthetic gaskets, saving the second one as a spare in case the one on the handle should ever wear out. Now I have a quiet, much easier to draw self defense weapon that defies detection as well. Bon chance ,mon amies!
Elias Katsaros (verified owner) –
I received my Sword Cane today , very good quality ,heavy duty blade, and very sharp ! I am very happy with this Cane !
Thank you very much!
Elias
Crazy blind Jake –
Have had one of my collection for years. You’re looking for a good sore pain that won’t break the bank this will definitely make you happy.