Wooden Round Shield with Riveted Cross – Deepeeka

The face is built from stout wooden planks joined edge to edge, with a steel rim binding the perimeter for reinforcement. A steel cross is riveted across the face, and the reverse is backed in suede leather.

The reverse has a leather arm band strap and a separate palm grip, both adjustable with brass buckles. The straps are arranged so the cross reads as an "X" when viewed from the front, and the arm goes through the upper strap while the hand grips the lower handle.

It measures 24'' in diameter and 1/2'' thick, a full-size round shield form used in medieval reenactment, display, and LARP contexts. At 6 lb 13 oz it carries comfortably on the arm for extended wear.

The cross-shaped strap and rim banding have a dark, hand-forged, slightly weathered surface, with the cross arms flaring into fleur-de-lis or trefoil shapes at the ends. Both are fastened to the wood with visible round rivets.

The interior is lined in dark suede, with four pointed metal corner caps spaced around the rim echoing the front's ironwork. Two black leather straps with punched holes and buckles cross the interior for the arm and hand grip.

Wipe the steel rim and cross with a light coat of oil to prevent rust, especially if stored anywhere humid. Keep the wood dry and away from direct sun or damp to avoid warping, and condition the suede backing and leather straps occasionally to keep them supple.

It's built with a wood core, riveted steel cross and rim, and an adjustable arm strap and grip typical of reenactment display and living history use. The listing doesn't specify a combat or sparring rating, so check with your group's own equipment standards before using it in contact drills.