Shrewsbury Hand and a Half Sword – Deepeeka
In stock
$209.99
- Shipping estimated at checkout
- Every blade inspected before shipping
- 30-day returns
- Blade
- C60 High Carbon Steel
- Overall Length
- 43 1/4"
- Weight
- 3 lbs 3 oz
- Brand
- Deepeeka
- Era
- Medieval
Overview
Shrewsbury Hand and a Half Sword - Deepeeka
The Shrewsbury Sword is a capable and hard-hitting bastard sword with a blade hand forged from C60 high carbon steel - a steel with properties similar to 1060 high carbon steel. The crossguard and pommel are crafted from resilient steel and the wooden grip is tightly bound in quality leather. A robust peen over the pommel anchors the blade tang into the hilt for a solid and robust overall construction. The sword is matched with a wood-core scabbard which is wrapped in high quality vegetable tanned leather to match the grip - a protective steel chape complete the sword.
The sword takes its namesake from the 1403 Battle of Shrewsbury which pitted Henry IV against rival Henry "Hotspur" Percy. Originally powerful supporters of Henry IV who desposed Richard II from the English throne, the Percy's felt snubbed by Henry for failing to reward them suitably for their support. Allying with the Welsh patriot Owain Glyndŵr and the powerful English noble Emund Mortimer they crafted a joint plan to divide up a conquered England wrested from Henry IV. On 21 July 1403 the Royalist armies met the rebel faction in battle.
The battle initially went well for the Percy's and their allies, with disciplined archery scything down the Royalist ranks. The Royalists had archers of their own, but the companies in command of the Percy's were superior and the Royalist army wavered. Seizing what he believed to be an opportunity to kill the King himself, Hotspur led a charge into the Royalists. In the melee Hotspur was killed by an arrow to the face in a moment when had his visor raised and with his death the resolve of the army crumbled, leaving the field to Henry IV and the Royalists. During the battle the Prince of Wales and future King of England, Henry V suffered a grievous wound to the face from an arrow. He was saved from the impressive skill of his physician John Bradmore who invented and improvised a device on the spot to extract the arrowhead from Henry in a tense surgical operation. Though permanently scarred, Henry V survived to become King.
Specifications
Every measurement that matters
- Brand
- Deepeeka
- Era
- Medieval
- Edge
- Unsharpened
- Pommel
- Peened
- Overall Length
- 43 1/4"
- Blade Length
- 35 1/8"
- Blade
- C60 High Carbon Steel
- Weight
- 3 lbs 3 oz
- P.O.B.
- 4 5/8"
- Thickness
- 4.8 mm - 3.3 mm
- Width
- 50.6 mm
- Grip Length
- 5"
- Country of Origin
- India
Reviews
What collectors are saying
Q&A
Questions from the community
Q What is this sword best suited for? Common Question
This is a battle-ready hand-and-a-half sword with a full-length C60 high carbon steel tang and a peened pommel, built for durability rather than display alone. In its shipped, unsharpened state it suits collecting, reenactment, and historical study, and once sharpened it is suitable for cutting tatami and water bottles. The grip is long enough for two-handed cuts, which fits the "bastard sword" format this piece is based on.
Q Is this a full tang sword? Common Question
Yes, and specifically a battle-ready one: the tang is forged from the same C60 high carbon steel as the blade, runs the full length of the hilt, and is peened over the pommel rather than threaded or bolted. That construction is what gives this sword the structural integrity to handle cutting work once sharpened.
Q What does "hand and a half" mean for how I hold and swing this sword? Common Question
A hand-and-a-half, or bastard, sword has a grip long enough to be gripped with one or both hands depending on the technique being used. At 5 inches, the grip here gives room for a second hand to extend reach and add power to cuts, while still being usable one-handed for faster work. This versatility is the defining trait of the type the Shrewsbury sword is based on.
Q Is the edge sharp? Common Question
This sword ships with an unsharpened edge. Kult of Athena's in-house sharpening service can be added before shipping to bring the blade to a condition suitable for light cutting of targets like tatami and water bottles.
Q What is the scabbard made of, and how should I care for it? Common Question
The scabbard has a wood core wrapped in vegetable-tanned leather, finished with a steel chape at the tip to protect it from wear. Leather sheaths like this can trap moisture against the blade, so for long-term storage it's best to keep the sword out of the scabbard and stored dry, wiping the leather itself clean and keeping it away from damp conditions.
Q How do I maintain the blade so it doesn't rust? Common Question
The blade is forged from C60 high carbon steel, which will develop rust if left dirty or damp, so wipe it down after handling to remove fingerprints and moisture. A light coat of oil on the blade and dry storage outside the scabbard will keep it in good condition over time.
Q What does the point of balance tell me about how this sword handles? Common Question
The point of balance sits 4 5/8 inches out from the guard, which for a 43 1/4 inch sword of this weight keeps mass concentrated closer to the hilt. That balance supports controlled, versatile handling across one- and two-handed grips rather than a blade-heavy feel, matching the cut-and-thrust design the Shrewsbury sword is built around.
Q Is this sword suitable for sparring? Common Question
This is a battle-ready sword, built with a durable full tang and solid steel construction for target cutting rather than for blade-on-blade contact. It is not designed or rated for sparring or stage combat use, which calls for swords specifically built and often blunted or rebated for that purpose.
Video
See it in motion
Deepeeka Shrewsbury Hand and a Half Sword Demo | Kult of Athena
15th C Cross and Shield Crusader Sword- Deepeeka- 2022 edition
The Maker
Deepeeka
Deepeeka creates an astonishing variety of replica weapons, armor, and re-enactment accessories that range from Classical Antiquity to the 20th Century. Deepeeka has been crafting replicas since the 1980s and their products are essential gear for many re-enactment groups. Many swords, daggers and other weapons made by Deepeeka are durably crafted and budget-friendly offerings. The steel is good and well-tempered and their leathercraft and woodworking are of excellent quality. Deepeeka’s products are handcrafted and (in the case of blades, hand-hammered) are a good deal for those who want a quality item at a good price.
Kult of Athena is the US distributor for Deepeeka products and we offer the largest in-stock selection you will find and we will beat any price you can find. If you are searching for a particular item or find a Deepeeka item listed elsewhere that is not seen on our site let us know and if it is available we can source it for you at a better price than seen elsewhere.
Often paired together

I got it sharpend and I am glad with it and how it feels the only complaint I have is that the hilt is not even with the blade and the crosses were not filled out that mutch but glad with what I got from them