Battle Ready
Valiant ArmourySKU VA316S

Valiant Armoury Craftsman Series – Long Leaf Blade Sword

No reviews yet. Leave a reviewQ&A · 8

No Longer Available

$1,095.00

  • Shipping estimated at checkout
  • Every blade inspected before shipping
  • 30-day returns

Overview

Valiant Armoury Craftsman Series - Long Leaf Blade Sword

This Leaf Bladed Bastard Sword by Valiant Armoury is a highly functional sword from their premium Craftsman Series line of swords. Lively and responsive, the sharpened blade of this sword has appleseed geometry edges which not only give the sword a fine edge, but a durable and damage-resistant one as well. The blade is 5160 high carbon steel which was tempered a 52 HRc. The steel was normalized twice over before tempering to evenly distribute its carbon content to improve grain structure and optimize the blade for heat treatment.

The crossguard and pommel are steel and the blade is sturdily mounted into the hilt with a hot peen over the pommel. The expertly-contoured grip is made from hardwood and then firmly bound with top quality blue-dyed leather.

Specifications

Every measurement that matters

Culture
Fantasy
Edge
Very Sharp
Pommel
Peened
Blade Length
29 3/4''
Weight
2 lb 6 oz
P.O.B.
3 1/4''
Thickness
5.4 mm - 2.1 mm
Width
50.8 mm
Grip Length
8 1/4''

Reviews

What collectors are saying

No reviews yet. Only logged in customers who have purchased this product may leave a review.

Q&A

Questions from the community

Ask a question
Q What is this sword designed for—display, cutting, or sparring? Common Question
A — KOA

This is a battle-ready, sharpened sword built from 5160 high carbon steel, made for cutting practice on targets like tatami mats and water bottles as well as display. The leaf-shaped blade and peened full tang construction give it the strength to hold up to that kind of use, not just stand on a shelf.

Q Is this a full tang sword? Common Question
A — KOA

Yes. The blade's tang runs the full length of the hilt in the same 5160 steel as the blade and is secured with a hot peen over the pommel, which is the construction a battle-ready sword needs for durability under cutting use.

Q How sharp does this sword ship, and what can I safely do with it? Common Question
A — KOA

The edge ships Very Sharp, ready for cutting practice on tatami and water bottles. Because it carries a live edge, it is not suited to sparring or contact drills.

Q What does the appleseed edge geometry mean for durability? Common Question
A — KOA

Appleseed geometry rounds the edge profile slightly behind the cutting bevel rather than grinding it to a thin flat edge. This gives the blade a fine edge for cutting while making it more resistant to chipping or rolling on impact.

Q What is the grip made of, and how is it finished? Common Question
A — KOA

The grip core is hardwood, expertly contoured for the hand and then wrapped in blue-dyed leather over a cord underlay, as shown in the photographs. The crossguard and pommel are steel, with the pommel peened directly over the tang for a solid, permanent fit.

Q How is the blade steel heat treated? Common Question
A — KOA

The blade is 5160 high carbon steel, normalized twice before tempering to evenly distribute carbon and refine the grain structure, then tempered to 52 HRc. That combination is aimed at a blade that takes an edge well and resists cracking under use.

Q How far out is the point of balance, and what does that mean for handling? Common Question
A — KOA

The point of balance sits 3 1/4 inches out from the guard. For a leaf-bladed sword of this blade length, that balance point keeps the blade lively and responsive in the hand rather than tip-heavy, suiting both single-hand and two-hand grip changes.

Q How do I care for this sword to prevent rust? Common Question
A — KOA

Wipe the blade down after handling to remove fingerprints and moisture, then apply a light coat of oil to the steel before storage. Store the sword somewhere dry; if it ever comes with a scabbard, don't leave the blade sheathed for long-term storage, since scabbards trap moisture against the steel and promote rust.

The Maker

Valiant Armoury

History comes alive in steel with Valiant Armoury’s line of medieval swords. Hand finished by owner Sonny Suttles or his son Zach Suttles, all grips scabbards and belts are made from scratch using vegetable tanned leather on all their swords.

View more by Valiant Armoury

Often paired together

Customers also bought