Valiant Armoury Craftsman Series – Marseille XVa Longsword with Scabbard
Usually Ships in About 10-12 Months
$1,295.00
- Shipping estimated at checkout
- Every blade inspected before shipping
- 30-day returns
- Overall Length
- Overall Length: 45 7/8"
- Weight
- 2 lbs 14.4 oz
- Brand
- Valiant Armoury
- Era
- Medieval
Overview
Valiant Armoury Craftsman Series – Marseille XVa Longsword with Scabbard
The Marseille Type XVa longsword from Valiant Armoury is part of Valiant’s Craftsman Collection and is made in the USA. Unlike many earlier Valiant Armoury swords which had blades of Chinese manufacture, the swords of the Craftsman Collection are made entirely in the USA to ensure a higher level of quality in accordance with more exacting specifications.
The blade of the Marseille is crafted from 5160 high carbon steel and tempered to a 50-52 HRc hardness. The steel itself was twice normalized for a finer internal grain structure and to also homogenize the carbon content of the steel to ensure that it was evenly tempered when heat-treated.
The diamond cross-section blade is fairly stiff to optimize it for thrusting to minimize loss of penetrative power to blade flex. The crossguard and pommel are mild steel and the Poplar wood grip is overlaid in tight leather. The sword is paired with a scabbard with a hard core of Poplar; it is finished with a binding of leather, a steel chape, and integrated metal hanging buckles. Included is a sword belt with a pair of strap hangers which can be adjusted in tandem with the scabbard buckles to control the height and angle that the sword is slung from the belt.
Specifications
Every measurement that matters
- Brand
- Valiant Armoury
- Era
- Medieval
- Edge
- Very Sharp
- Pommel
- Peened
- Overall Length
- Overall Length: 45 7/8"
- Blade Length
- Blade: 25 3/8"
- Weight
- 2 lbs 14.4 oz
- P.O.B.
- 5 1/8"
- Thickness
- 5.9 mm - 2.8 mm
- Width
- 49.9 mm
- Grip Length
- 6 7/8"
Reviews
What collectors are saying
Q&A
Questions from the community
Q What steel is the blade made from, and how is it heat-treated? Common Question
The blade is forged from 5160 high-carbon steel, a tough spring steel well suited to sword blades. It's tempered to 50-52 HRc and was normalized twice before hardening, giving it an even grain structure and consistent hardness along its length.
Q Is this sword full tang? Common Question
The peened pommel is the telltale sign of traditional full-tang construction here: the tang runs the full length of the blade and grip in the same 5160 steel, extending through the pommel where it's hammered over and secured. That's the construction method that gives a sword like this its strength for battle-ready use, rather than a tang welded or bolted on separately.
Q How sharp does this sword ship, and what can I use it on? Common Question
This sword ships Very Sharp. Combined with its 5160 high-carbon steel blade and diamond cross-section built to resist flex on the thrust, it's suited to display and to test cutting on tatami mats or water bottles. Because the edge is live, it is not a sword to bring into sparring or stage combat.
Q What is the blade geometry built for? Common Question
The blade has a diamond cross-section and is kept fairly stiff, which limits flex on a thrust so you don't lose penetrating power into the target. That geometry fits the Type XVa longsword form, a historical design built around strong thrusting while still carrying a usable cutting edge.
Q What's the grip made of, and can it be used two-handed? Common Question
The grip core is Poplar wood, wrapped tightly in leather, and measures 6 7/8" long. That length gives enough room for a two-handed hold, in keeping with the longsword's design.
Q What does the scabbard and belt set include? Common Question
The scabbard has a Poplar wood core bound in leather, finished with a steel chape at the tip and integrated metal hanging buckles. It comes with a matching sword belt and a pair of strap hangers, so you can adjust both the buckles and hangers together to set the height and angle the sword rides at your side.
Q What do the fittings look like? Common Question
From the photographs, the crossguard has rounded, slightly flared quillon tips and a polished steel finish, paired with a faceted pommel in the same bright finish. The scabbard shows tooled, decorative leather work along its body, with orange-toned leather straps and buckles connecting it to the belt.
Q How do I care for the blade and leather scabbard? Common Question
Wipe the 5160 steel blade down after handling and apply a light coat of oil to prevent rust, especially since the leather-wrapped grip and leather scabbard can hold moisture against the steel. Store the sword in a dry place, and keep it out of the scabbard for long-term storage since leather and the Poplar core inside it can trap humidity against the blade over time.
Q What is this sword best suited for overall? Common Question
This is a battle-ready longsword with a live, Very Sharp edge, a durable 5160 steel full-tang build, and a stiff thrust-oriented blade, making it a strong fit for display and for test cutting on targets like tatami or water bottles. Its sharp edge rules out sparring or stage combat use, so it's best suited to collectors and cutters rather than contact training.
The Maker
Valiant Armoury
History comes alive in steel with Valiant Armoury’s line of medieval swords. Hand finished by owner Sonny Suttles or his son Zach Suttles, all grips scabbards and belts are made from scratch using vegetable tanned leather on all their swords.
Often paired together

No reviews yet. Only logged in customers who have purchased this product may leave a review.