Valiant Armoury Craftsman Series – Warden of the North
Usually Ships in About 10-12 Months
$1,095.00
- Shipping estimated at checkout
- Every blade inspected before shipping
- 30-day returns
- Overall Length
- 48''
- Weight
- 3 lbs 10 oz
- Brand
- Valiant Armoury
Overview
Valiant Armoury Craftsman Series - Warden of the North
No mere display piece or wall hanger, this Fantasy inspired Greatsword is highly functional and its broad, sweeping blade ensures it is a supremely capable cutting sword! It was entirely made in the USA by Zach and Sonny Suttles of Valiant Armoury.
The blade is well-tempered 5160 high carbon steel with a finely honed edge and a final 52 HRc hardness. The sharp blade edges have appleseed geometry to ensure that they are damage resistant and durable. Before tempering the steel was normalized twice to homogenize its carbon content to create the conditions for precise tempering and an improved steel grain structure. The crossguard and pommel are antique finished steel and the wooden grip is tightly bound in black leather. A hot peened hilt assembly ensures a solid overall construction.
Specifications
Every measurement that matters
- Brand
- Valiant Armoury
- Edge
- Very Sharp
- Pommel
- Peened
- Overall Length
- 48''
- Blade Length
- 35 1/2''
- Weight
- 3 lbs 10 oz
- P.O.B.
- 3 1/2"
- Thickness
- 5.5 mm - 3.2 mm
- Width
- 55.6 mm
- Grip Length
- 7 1/2"
Reviews
What collectors are saying
Q&A
Questions from the community
Q What is this sword best suited for—display, cutting, or sparring? Common Question
This is a Battle Ready greatsword built for cutting rather than display. Its broad, sweeping 35 1/2" blade and 5160 high carbon steel construction make it suited to cutting tatami mats and water bottles, not sparring or contact drills, since it ships with a Very Sharp edge rather than a blunted sparring profile.
Q What steel is the blade made from, and how was it heat treated? Common Question
The blade is 5160 high carbon steel, normalized twice before tempering to homogenize the carbon content and refine the grain structure. It's hardened to 52 HRc and ground with appleseed edge geometry, a rounded-shoulder edge profile that resists chipping and rolling under cutting use.
Q Is this sword full tang? Common Question
The hilt is hot peened, meaning the tang runs the full length of the grip in the same 5160 steel as the blade and is peened over the pommel to lock the whole assembly together. That's the full-length tang construction found on functional battle-ready swords, rather than a grip built around a narrow rod or bolted scales.
Q How is the sword balanced, and what does that mean for handling? Common Question
The point of balance sits 3 1/2" from the guard, close in for a sword with a 35 1/2" blade and 48" overall length. That keeps the blade's mass manageable in the hands despite its reach, which matters on a hand-and-a-half sword meant for two-handed cuts.
Q Does the sword ship sharp, and what can I cut with it? Common Question
Yes, the edge is Very Sharp out of the box. It's suited to cutting tatami and water bottles, taking advantage of the broad blade and appleseed edge geometry for clean, durable cuts.
Q What are the grip and pommel made of? Common Question
The grip is wood tightly wrapped in black leather for a secure hold, with cord-style binding near the guard and pommel visible in the photographs. The pommel is a flattened, wheel-shaped steel disc with an antique finish and a central peened rivet, matched by a steel cross-guard with slightly down-curved quillons.
Q How do I care for this sword to keep it in good condition? Common Question
Wipe the 5160 steel blade down after handling or cutting to remove moisture and fingerprints, then apply a light coat of oil to prevent rust. Store the sword in a dry place out of its scabbard if one is used, since scabbards trap moisture against the blade over time, and keep the leather-wrapped grip away from excess humidity.
Q What makes this a Battle Ready sword rather than a display piece? Common Question
The blade is normalized twice and tempered to 52 HRc with appleseed edge geometry for damage resistance, and the hilt is hot peened for a solid, full-tang assembly. Together with the 5160 high carbon steel blade, this construction is built to take the stress of actual cutting rather than sitting as a static wall piece.
Video
See it in motion
Valiant Armoury Warden of the North Greatsword Review: Game of Thrones Fantasy Sword Done Right
The Maker
Valiant Armoury
History comes alive in steel with Valiant Armoury’s line of medieval swords. Hand finished by owner Sonny Suttles or his son Zach Suttles, all grips scabbards and belts are made from scratch using vegetable tanned leather on all their swords.
Often paired together

Guys, a magnificent sword, perfect materials and construction, it’s not one of the many stupid replicas of Ned Stark’s long sword… it’s an interpretation and reproduction of the Valiant that reminds you of Games of Thrones but gives you a beautiful, balanced and sharp sword that’s perfectly functional and excellent for cutting sessions… I recommend it to everyone. A hug from distant Italy and below is my review.
https://youtu.be/ch9Qv51ls_U?si=4_qrV27EV8zXTUDz
Hi men is not a replica but it’s an interpretation and reproduction of the Valiant that reminds you of Games of Thrones but gives you a beautiful, balanced and sharp sword that’s perfectly functional and excellent for cutting sessions… I recommend it to everyone. A hug from distant Italy and below is my review.
https://youtu.be/ch9Qv51ls_U?si=4_qrV27EV8zXTUDz