Ronin Katana – Longsword – Euro Model #2 – Blemished Grade
In stock
$315.00
- Shipping estimated at checkout
- 30-day returns for standard grade
- Blade
- 1075 High Carbon Steel
- Overall Length
- 46''
- Weight
- 2 lb 13.4 oz
- Brand
- Ronin Katana
Overview
Ronin Katana - Longsword - Euro Model #2 - Blemished Grade
This Medieval Longsword by Ronin Katana has a sharpened and tempered 1075 high carbon steel blade. The guard and pommel are stainless steel and the wooden grip is bound in cord and tightly overlaid with leather. The blade tang is fitted though the hilt and peened over the pommel for a secure hilt construction.
The sword comes with a wooden scabbard which is sheathed in leather and fitted with a protective metal chape. An all-leather sword belt is knotted onto the scabbard.
A deft and agile longsword, this example has a blade well-suited for both cutting and thrusting; the fuller transitions into a diamond-cross section to stiffen the tip for thrusting and the blade retains enough width and mass in its main-striking portions to allow it to cut and slice with power and efficiency.
Specifications
Every measurement that matters
- Brand
- Ronin Katana
- Edge
- Sharp
- Pommel
- Peened
- Overall Length
- 46''
- Blade Length
- 36 3/16''
- Blade
- 1075 High Carbon Steel
- Weight
- 2 lb 13.4 oz
- P.O.B.
- 6 1/4''
- Thickness
- 6.5 mm - 2.9 mm
- Width
- 47.6 mm
- Grip Length
- 7 1/2''
- Country of Origin
- China
- Type
- longsword
Reviews
What collectors are saying
Q&A
Questions from the community
Q What does the "Blemished Grade" label mean for this sword? Common Question
Blemished Grade means this is a second-quality piece with minor to moderate flaws in appearance, such as surface scratches, scabbard dents or cracks, or minor blade pitting. None of this affects the sword's construction, durability, or function, so it handles and performs the same as a standard-grade example.
Q What is this sword built for? Common Question
This is a one-handed Euro-style longsword with a 36 3/16'' blade of 1075 high carbon steel, built to both cut and thrust. The fuller runs most of the blade's length to keep it light and quick, then the blade transitions into a stiffened diamond cross-section near the point to support thrusting while retaining enough width through the main striking area for solid cutting.
Q Is this sword full tang? Common Question
Yes. The tang is fitted through the full length of the hilt and peened directly over the pommel, which is the same full-length, same-steel tang construction that gives a battle-ready sword its strength for cutting use.
Q What does "Battle Ready" mean, and does this sword ship sharp? Common Question
Battle Ready means this sword is built with the durability needed for target cutting, with a full tang and a carbon steel blade rather than stainless. This example ships with a sharp edge, suitable for cutting targets like tatami or water bottles. Battle Ready is a different category from Sport or Stage Combat swords, which are built for blade-on-blade sparring; this sword is not intended for that kind of contact use.
Q What does the point of balance tell me about handling? Common Question
The point of balance sits 6 1/4'' out from the guard, which keeps the blade lively and quick in the hand for a longsword of this length. That placement supports the sword's dual role of cutting and thrusting rather than favoring one over the other.
Q What comes with the sword? Common Question
The sword comes with a wooden scabbard sheathed in leather and fitted with a metal chape, along with an all-leather sword belt knotted onto the scabbard.
Q How should I care for this sword? Common Question
Wipe the carbon steel blade down after handling and keep a light coat of oil on it to prevent rust, since 1075 steel is not stainless. The grip is wood under cord wrap and leather, so keep it dry, and store the blade outside its leather-covered wooden scabbard for the long term, since scabbards trap moisture against the steel.
Q What does the hilt look like? Common Question
The pommel is a polished steel disc with a recessed center cap, and the crossguard is a curved, downturned steel bar with a satin or brushed finish. The grip is wrapped tightly in black cord beneath a leather overlay, giving a ribbed texture in hand.
Video
See it in motion
The Maker
Ronin Katana
Ronin Katana offers the largest selection of Samurai swords. After traveling to Longquan city, founder Chris Scoggin dedicated years to crafting a line of revolutionary Japanese and European swords.
Often paired together

No reviews yet. Only logged in customers who have purchased this product may leave a review.