Battle Ready
Cold SteelSKU CS88HS

Cold Steel – Competition Cutting Sword

4.00 · 3 reviewsQ&A · 9

In stock

$279.99

  • Shipping estimated at checkout
  • Every blade inspected before shipping
  • 30-day returns
Blade
1050 High Carbon Steel
Weight
2 lb 14.5 oz

Overview

Cold Steel - Competition Cutting Sword

The Cold Steel Competition Cutting sword takes its design and proportions from the Type XVIIIc swords which are well known to be excellent cutting swords with their wide-bladed design. The sharpened blade is forged from well-tempered 1050 high carbon steel and is optimized for slicing and cutting tatami mats, cardboard tubes, rope and other relatively soft targets used in cutting competitions. The crossguard and pommel are steel and the long grip of leather-wrapped wood gives its wielder plenty of leverage for fast and powered cutting strokes. Included with the sword is a black leather scabbard with a steel chape and locket.

Specifications

Every measurement that matters

Edge
Very Sharp
Blade
1050 High Carbon Steel
Weight
2 lb 14.5 oz
P.O.B.
2 3/16"
Thickness
4 mm - 2.6 mm
Width
68 mm
Grip Length
8"

Reviews

What collectors are saying

4.0
3 verified reviews
5
1
4
1
3
1
2
0
1
0
Showing 3 reviews
  1. Richard Miller

    I got this sword to see if it was actually as good a cutter as Cold Steel claimed.
    To be honest, it is a decent cutter, but otherwise it’d just a Sword-Like-Object that can be used to cut most soft targets such as pool noodles, water bottles, single Tatami mats and wet newspaper. Beyond that, it just LOOKS like a well made sword.
    First, The specs listed above are quite true to the sword that I received. I am a bit surprised that Kult of Athena found ANY distal taper in the blade at all. On my sword and with my digital calipers, the thickness of the blade is pretty uniform at about 4mm along the length with a couple of spots where the thickness drops to about 3.7-3.8mm. It’s really only in the last inch and a half of the blade where it varies down to under 3mm. The blade has a center ridge (where I made my measurements) but it is definitely not hollow ground (no judgement… just saying) but on the “flat” of the blade there is also no distal taper found.
    As to the edges, there is really no taper or thinning as the blade nears the edge. The edge is just a bevel, but sharp bevel to be sure.
    The edge is sharp indeed and very even, make no mistake about it. With a very thin blade that is also quite flat, there is very little drag during a cut which lends to easier cutting. This blade’s geometry similar to some extremely fine cutters like XVIIIc blades offered by Albion and Arms & Armor which are true fighting swords, but the offering by Cold Steel really is just a specialty tool for cutting soft targets, and doesn’t feel much like a true, well designed weapon.
    On the good side, this sword does lend itself to cutting soft targets, and it might make a fair-to-middling cutter like myself capable of making a few of my “almost went through” cuts into “all the way through” cuts. The competitors that I have seen who win cutting competitions however, are people who need absolutely no gimmicks to make solid multiple cuts with authentic examples of medieval fighting swords.
    I admit that my review is a bit biased due to my affection for reproductions of sword that might have been used as weapons the way swords were meant to be used in battle rather than “Bearing Swords” or “Funeral Achievements” designed only for looks.
    To sum it up I have to admit that this “nut-pommeled-looks-like-the-Arbedo-Sword” cutter really does cut well and on that note I would give it four stars, but because it’s more a tool than an example of what a medieval was like, I’d give two stars so I split the difference and gave it Three Stars.

  2. sgregg

    It cuts great. It is well balanced, The grip is well made and allows for good indexing, which helps in the cutting. The blade is on the short side, and is hollow ground with a mirror polish. I got this with the factory edge, no extra sharpening. I am not really a fan of the pommel design. I would prefer either a wheel or scent stopper pommels. Overall the finish is solid. The scabbard is a bit rinky-dink, just okay. I will probably make my own. Due to the blade length, this could be easily wielded single handed. If you are wearing this to an event, you will be less likely to run the scabbard end into other people or object, LOL. I have a XVIIIc that is significantly more expensive that this sword, but this does just as good a job at slicing targets. Is it a reproduction of a extant artifact? Nope. But it is not marketed as such so I am quite happy with it.

  3. jordanclymer

    Hello there, just posting to counterbalance another review. You know, there is another site that sells swords specifically catered to historic replicas and it even has ‘replica’ in the name. Maybe if someone is that concerned with it being a replica of a historic model, they should try that place out instead of making a good sword look like a not-so-good sword. I bet he already frequents that site and One Stars all the fantasy swords they offer…

    However, I have no desire to drive business away from KOA; they do just fine with customer service and QC and have most of the items any of the other sites offer, and almost always at a better price, anyway. This is “Kult of Athena”; it’s about weapons and war. Others say this sword is a good cutter and that’s what the name of the sword implies and what it was designed for and for far cheaper than any similar model I’ve seen offered. No need to take points off for ‘historic accuracy’. It sure looks similar to a lot of replica models I’ve seen here and other places.

Q&A

Questions from the community

Ask a question
Q What is this sword built for? Common Question
A — KOA

This sword takes its proportions from Type XVIIIc swords, a historical pattern known for broad, cutting-oriented blades. It's built for cutting-competition work, with a wide 68 mm blade of 1050 high carbon steel designed to drive cleanly through tatami mats and water bottles.

Q Does the blade come sharp? Common Question
A — KOA

This sword ships with a very sharp edge, so it's ready for cutting tatami and water bottles right out of the box.

Q Is this a full-tang sword I can rely on for cutting? Common Question
A — KOA

The blade and tang are forged as one piece from 1050 high carbon steel, with the tang running the full length of the hilt and secured at the pommel by a threaded nut. That continuous steel spine is what gives this sword the durability to stand up to target cutting.

Q What does the point of balance tell me about how it handles? Common Question
A — KOA

The point of balance sits 2 3/16" out from the guard, keeping the mass close to the hand. That's the kind of balance cutting-competition swords are built around, since it keeps the blade feeling quick and controllable through fast cutting strokes.

Q What's the grip like, and why is it 8" long? Common Question
A — KOA

The grip is leather-wrapped wood running 8" long, giving extra room for a two-handed hold or an extended one-handed grip. That added length translates into more leverage for powering through cutting strokes.

Q What comes with the sword? Common Question
A — KOA

It includes a black leather scabbard fitted with a steel chape at the tip and a steel locket at the throat. For the long term, the blade is best stored out of the scabbard, since any sheath can trap moisture against the steel.

Q How do I take care of this sword? Common Question
A — KOA

Wipe the blade down after use and keep a light coat of oil on the steel to prevent rust, especially before long-term storage. Keep the leather scabbard dry, and store the blade separately from it rather than leaving it sheathed, since leather holds moisture against the steel over time.

Q What can I cut with this sword? Common Question
A — KOA

This sword is suited to cutting-competition targets like tatami mats and water bottles, matching the wide, cutting-focused blade geometry it's built around.

Q Where is this sword made? Common Question
A — KOA

It's manufactured in India.

Video

See it in motion

  • Review and Test Cutting of Indian Tulwar by Cold Steel

  • Introducing - The Competition Cutting Sword

The Maker

Cold Steel

Cold Steel was founded in 1980; a stalwart of the knife community, Cold Steel also has a large selection of swords and daggers which are sourced from all over the world. Functional and competitively priced, Cold Steel products showcase a substantial variety of offerings and they cover martial arts weapons, historical swords, and robust tomahawks and practical machetes.

View more by Cold Steel

Often paired together

Customers also bought