Darksword Armory Two Handed Norman Sword with Shorter Fuller and Black Scabbard
Usually Ships in About 4-6 Months
$650.00
- Shipping estimated at checkout
- Every blade inspected before shipping
- 30-day returns
- Overall Length
- 45 5/16''
- Weight
- 2 lb 13.4 oz
- Brand
- Darksword Armory
- Era
- Medieval
Overview
Darksword Armory Two Handed Norman Sword with Shorter Fuller and Black Scabbard
The Darksword Armory Two-Handed Norman Sword has a blade of 5160 high carbon steel. The blade was tempered to possess a hardness of about 60 HRC at the edge and a softer, flexing core hardness of 48-50 HRC. The guard and pommel are steel and the wooden grip is wrapped in cord and overlaid in leather.
The sword comes with a wood-core scabbard finished with a black leather exterior and a chape piece of steel.
Specifications
Every measurement that matters
- Brand
- Darksword Armory
- Era
- Medieval
- Edge
- Unsharpened
- Pommel
- Peened
- Overall Length
- 45 5/16''
- Blade Length
- 35 9/16''
- Weight
- 2 lb 13.4 oz
- P.O.B.
- 7 5/8''
- Thickness
- 3.4 mm - 4.6 mm
- Width
- 50.6 mm
- Grip Length
- 7 3/8''
- Country of Origin
- Canada
- Type
- longsword
Reviews
What collectors are saying
Q&A
Questions from the community
Q What is this sword built for, and is it a good fit for me? Common Question
This is a Battle Ready two-handed sword built on a 5160 high carbon steel blade with a full-length tang, which is the construction that stands up to target cutting once the edge is sharpened. At 45 5/16'' overall with a 35 9/16'' blade and a point of balance of 7 5/8'' out from the guard, it's suited to a buyer who wants a historically-styled Norman sword for display, training in cuts and form, or cutting tatami and water bottles after sharpening.
Q Does this sword have a full tang? Common Question
Yes, it's built with a full-length tang of the same 5160 steel as the blade, running through the grip to the pommel, where it is peened - hammered over to lock the pommel permanently in place. That's the full-tang, peened-pommel construction that gives a Battle Ready sword its strength for cutting, rather than a narrower tang riveted to grip scales as you'd see on a tactical-style piece.
Q Is this sword sharp out of the box? Common Question
No, it ships with an unsharpened edge. Kult of Athena offers an add-on sharpening service for Battle Ready blades like this one, which will bring it to a condition suitable for light cutting of targets such as tatami or water bottles.
Q What does the point of balance mean for how this sword handles? Common Question
The point of balance sits 7 5/8'' out from the guard, which keeps the mass of the blade manageable relative to its 35 9/16'' length. That placement supports controlled cuts whether the sword is handled with one or two hands, in keeping with its Norman-style, hand-and-a-half design.
Q What is the blade steel and how was it treated? Common Question
The blade is 5160 high carbon steel, tempered to roughly 60 HRC hardness at the edge with a softer 48-50 HRC core for flex. That combination gives a blade that holds an edge well once sharpened while resisting breakage under the stress of cutting.
Q What is the grip made of? Common Question
The grip has a wood core wrapped in cord for texture and grip, then overlaid in leather. The guard and pommel are steel, and the pommel is peened onto the full tang for a secure, permanent fit.
Q What does the scabbard look like and is it good for storing the blade? Common Question
The scabbard has a wood core finished in black leather on the outside, with a steel chape at the tip, matching the bright steel fittings on the sword itself. Like any leather-covered scabbard, it can trap moisture against the blade, so for long-term storage the sword is better kept out of the scabbard, lightly oiled, and in a dry place.
Q How should I maintain this sword? Common Question
Wipe the blade down after handling and apply a light coat of oil to the steel to prevent rust, paying attention to the fuller where moisture can collect. Store the sword in a dry place out of its scabbard rather than leaving it sheathed long-term, and keep the leather-wrapped grip away from excess moisture as well.
Q What's the difference between this Battle Ready sword and a sparring or stage combat sword? Common Question
Battle Ready construction like this sword's full tang and 5160 steel blade is built for durability in target cutting once sharpened, not for blade-on-blade contact. Sport or stage combat swords are a separate category, purpose-built with blunted or rebated edges and different blade geometry for safe sparring, and this sword isn't intended for that kind of contact use.
The Maker
Darksword Armory
Founded and operated by Eyal Azerad, Darksword Armory has long been supplying the re-enactment and sword enthusiast community with swords, daggers and more since 1996. New offerings from Darksword Armory are typically durable handcrafted swords with well-tempered blades. Most models come with a wooden scabbard and these often come in two options with plain scabbards or scabbards with integrated sword belts available.
Often paired together









Newer one I received one a couple months ago from Dark Sword when they started rolling out the newer tempering with a wider tangs. They handle better with smaller wood grips that they come with and with a wider tang. the only issue is the flexing on mine, it flexes more to one side than the other when you swing. I contacted darksword about it and sent them photos of it but they couldn’t see what I see. I’m going to go ahead and hope that mine’s just a fluke but if you like them and you like two handed swords I do recommend this one