Valiant Armoury Craftsman Series – Marseille XVa Longsword – Brown Sword Belt
Usually Ships in About 10-12 Months
$1,295.00
- Shipping estimated at checkout
- Every blade inspected before shipping
- 30-day returns
- Overall Length
- Overall Length: 45 7/8"
- Weight
- 2 lbs 14.4 oz
- Brand
- Valiant Armoury
- Era
- Medieval
Overview
Valiant Armoury Craftsman Series – Marseille XVa Longsword - Brown Sword Belt
Please Note: The leather sword belt and sword hangers of this sword are actually brown in color - not tan as shown in this photo.
The Marseille Type XVa longsword from Valiant Armoury is part of Valiant’s Craftsman Collection and is made in the USA. Unlike many earlier Valiant Armoury swords which had blades of Chinese manufacture, the swords of the Craftsman Collection are made entirely in the USA to ensure a higher level of quality in accordance with more exacting specifications.
The blade of the Marseille is crafted from 5160 high carbon steel and tempered to a 50-52 HRc hardness. The steel itself was twice normalized for a finer internal grain structure and to also homogenize the carbon content of the steel to ensure that it was evenly tempered when heat-treated.
The diamond cross-section blade is fairly stiff to optimize it for thrusting to minimize loss of penetrative power to blade flex. The crossguard and pommel are mild steel and the Poplar wood grip is overlaid in tight leather. The sword is paired with a scabbard with a hard core of Poplar; it is finished with a binding of leather, a steel chape, and integrated metal hanging buckles. Included is a sword belt with a pair of strap hangers which can be adjusted in tandem with the scabbard buckles to control the height and angle that the sword is slung from the belt.
Specifications
Every measurement that matters
- Brand
- Valiant Armoury
- Era
- Medieval
- Edge
- Very Sharp
- Pommel
- Peened
- Overall Length
- Overall Length: 45 7/8"
- Blade Length
- Blade: 25 3/8"
- Weight
- 2 lbs 14.4 oz
- P.O.B.
- 5 1/8"
- Thickness
- 5.9 mm - 2.8 mm
- Width
- 49.9 mm
- Grip Length
- 6 7/8"
Reviews
What collectors are saying
Q&A
Questions from the community
Q What is this sword built for — display, cutting, or sparring? Common Question
This is a battle-ready Type XVa longsword with a very sharp edge, built as a working weapon rather than a wall-hanger or sparring tool. Its diamond cross-section blade is stiffened for thrusting while still carrying a true cutting edge, making it well suited to cutting practice on targets like tatami or water bottles, or to collection as a historically accurate piece.
Q What steel is the blade made from, and how is it heat treated? Common Question
The blade is 5160 high carbon steel, a steel well regarded for sword blades because it holds up well under flex and impact. Valiant normalizes it twice before hardening to refine the grain structure and even out the carbon content, then tempers it to 50-52 HRc for a blade that is hard enough to hold an edge but tough enough to resist cracking.
Q Is this sword full tang? Common Question
The pommel is peened, meaning the tang passes all the way through the grip and is hammered over the pommel to lock the assembly together. This is the traditional full-length tang construction used on historical swords, and it is what gives a battle-ready sword like this one the strength to take real use rather than just display.
Q Does this sword come sharp, and is it safe to spar with? Common Question
Yes, this sword ships with a very sharp edge, so it is set up for cutting rather than contact drills. It should not be used for sparring or any contact work against another person or weapon, sharpened or not.
Q How should I take care of the blade and scabbard? Common Question
Wipe the blade down after handling or cutting and keep a light coat of oil on the steel to prevent rust, since 5160 carbon steel will corrode if left damp or bare. The scabbard has a Poplar wood core wrapped in leather, so keep the leather conditioned, but store the blade itself out of the scabbard for the long term since leather holds moisture against the steel.
Q What does the grip and handle feel like, and how is it finished? Common Question
The grip is Poplar wood wrapped tightly in leather over a 6 7/8" length, giving a secure, traditional feel in hand. The crossguard and pommel are mild steel with a polished finish, and the pommel is faceted with peened construction.
Q What comes with the sword, and what color is the belt? Common Question
The sword comes complete with a matching scabbard and a leather sword belt with a pair of strap hangers, so you can adjust the height and angle the sword hangs at. The belt and hangers are brown leather; the product photo's lighting makes them look more tan, but the actual color is brown.
Q How is the scabbard constructed? Common Question
The scabbard has a hard Poplar wood core finished in leather, with a steel chape at the tip and integrated metal hanging buckles for the belt straps. The leather shows tooled, decorative patterning along its length.
The Maker
Valiant Armoury
History comes alive in steel with Valiant Armoury’s line of medieval swords. Hand finished by owner Sonny Suttles or his son Zach Suttles, all grips scabbards and belts are made from scratch using vegetable tanned leather on all their swords.
Often paired together

No reviews yet. Only logged in customers who have purchased this product may leave a review.